Dynamic Penetration Test 1 N/s

One of the most common means for damage to a wire/cable on an aircraft is when the wire/cable is crushed. This may happen by a misaligned LRU, accidental contact by maintenance, or any other way that a wire/cable may be pinched when in-service. A wire/cable’s ability to withstand compression damage, particularly at elevated temperatures, will likely correspond to fewer physical damage-related issues.

• The dynamic cut-through test is designed to assess the cut-through force of a wire/cable specimen.
• The wire/cable specimen is compressed under the fine edge of a jig until contact is made between the wire/cable conductor and the test jig. The pass/fail criteria for this test is based on the wire/cable’s specification.
• 24VDC detection circuit that senses the contact between the cutting edge and the metallic conductor.
• Load is incremented at 1 N/s as per specification requirement and test is conducted at ambient temperature