• 4/8 Cell Ageing Oven Quick View
    • 4/8 Cell Ageing Oven Quick View
    • 4/8 Cell Ageing Oven

    • Specification Compliance: IEC 60811 -401: 2012 and other International Standards Full range of ageing ovens for precision ageing of rubbers and plastics under controlled conditions. All ovens conform to ISO 188, IEC 811 and other technical equivalent standards. Ovens are suitably designed to give precise temperature control, and controlled air exchange rate. New and improved digital flow meters ensure very…
    • Read more
  • Ac High Voltage Quick View
    • Ac High Voltage Quick View
    • Ac High Voltage

    • Specification Compliance: IEC 60811, IS 10810 Manual/Motorized or PLC Controlled AC High Voltage Test Set Up to 800 kV Input 230V or 415 V, 50/60 Hz Standard Test Ranges: 5/10 kV at 10 kVA 5/10 kV at 22 kVA 5/10 kV at 50 kVA 5/10 kV at 100 kVA
    • Read more
  • Bunched Cable Test (CPR) Quick View
    • Bunched Cable Test (CPR) Quick View
    • Bunched Cable Test (CPR)

    • Specification Compliance: IEC 60332-3-10/BS EN 50399 The test rig comprises a vertical test chamber having a width of (1 000 ? 100) mm, a depth of (2 000 ? 100) mm and a height of (4 000 ? 100) mm; the floor of the chamber shall be raised above ground level Two ladders are supplied with the equipment. Depending upon…
    • Read more
  • Bunched Cable Tester (Ladder Test) Quick View
    • Bunched Cable Tester (Ladder Test) Quick View
    • Bunched Cable Tester (Ladder Test)

    • Specification Compliance: IEC 60332-3-10/BS EN 50399 The test rig comprises a vertical test chamber having a width of (1 000 ? 100) mm, a depth of (2 000 ? 100) mm and a height of (4 000 ? 100) mm; the floor of the chamber shall be raised above ground level Two ladders are supplied with the equipment. Depending upon…
    • Read more
  • Cable Abrasion Test Quick View
    • Cable Abrasion Test Quick View
    • Cable Abrasion Test

    • Specification Compliance: IEC 60229, BS 6724, BS 7846 and other International Standards Vertical force is applied on the cable by specified test weights depending upon the overall diameter of cable. Lay the sample of cable straight and horizontal on the firm base. In the middle part of the sample, place a length of low carbon steel (mild steel) angle horizontally,…
    • Read more
  • Cable Quickie Quick View
    • Cable Quickie Quick View
    • Cable Quickie

    • Specification Compliance: IEC 60811-1-1 Commonly known as vision measuring system. SA ASSOCIATES developed camera-based system for cable geometrics that is measuring insulation and sheath in accordance to IEC60811-201,202,203 and 60811-1-1. Integrated high-resolution camera allows to measure very accurate dimensions specified in test standard offering accuracy level and microns. The instrument comprises a measuring software which offers a one clicks measurement…
    • Read more
  • Carbon Black Content Quick View
    • Carbon Black Content Quick View
    • Carbon Black Content

    • Specification Compliance: ASTM D 1603, IEC 60811-4-1 Apparatus allows the determination of Carbon Black content in polyethylene and polypropylene, which is made gravimetrically after paralysis of the sample in pure nitrogen environment. Carbon Black content in the sample is calculated by the weight difference of the specimen before and after treatment in the apparatus. Apparatus consists of a tubular furnace…
    • Read more
  • Cold Bend Test Quick View
    • Cold Bend Test Quick View
    • Cold Bend Test

    • Specification Compliance: IEC 60811- 504? Test is conducted according to IEC60811-504 and is ensured to access performance of electrical cables at low temperate. Test is carried out on insulation and sheathing material. Instrument is supplied with interchangeable mandrels having nominal diameter between 4-5 times of test sample. Test is generally performed on cables with and external diameter not exceeding 12.5…
    • Read more
  • Cold Elongation Test Quick View
    • Cold Elongation Test Quick View
    • Cold Elongation Test

    • Specification Compliance: IEC 60811- 505 Conducted to meet the requirements of BS EN 60811-505. Test performed on the insulation and sheathing materials of electrical cables and fiber optic cables with a diameter in excess of 12.5mm From the prepared sample of cable insulation (thickness between 0.6mm and 2mm) and which has been conditioned at ambient room temperature, 2 dumb-bell shaped…
    • Read more
  • Cold Impact Quick View
    • Cold Impact Quick View
    • Cold Impact

    • Specification Compliance: IEC 60811- 506 Test assembly is placed in suitable low temperature test cabinet. Test shall be carried out at the temperature specified in the relevant cable standard. Indented for sheathed cables of any type, irrespective of the type of insulation of the cores, and for the insulation of wires, cables and flat cables without sheath if required by…
    • Read more
  • Conditioning Chamber (Humidity Cabinets) Quick View
    • Conditioning Chamber (Humidity Cabinets) Quick View
    • Conditioning Chamber (Humidity Cabinets)

    • Specification Compliance: IS 10810, IEC 60811 and other International Standards Dimensions: Customized as per user requirement Construction: Inside: SS 304, Outside: Duly Powder Coated Humidity: 40-90% RH (Custom range available) Temperature: 5 to 95 Deg.C (Custom range available) Humidity Measurement: Capacitive Sensor Temperature Controller & Humidity Indicator: Digital, made in JAPAN Spray Nozzle: Provided Boiler with heater for Steam Generator:…
    • Read more
  • Conductor Resistance Test Quick View
    • Conductor Resistance Test Quick View
    • Conductor Resistance Test

    • Standard Compliance: IS 10810, IEC 60811 and other related standards Traditionally the conductor resistance test equipment is either a Kelvin Double Bridge or a Wheatstone Bridge, Using the principle of balancing the voltage across known resistors to determine the unknown resistance. Modern equipment has been developed which determines the cable conductor resistance through the principle of Ohms law, calculating the…
    • Read more
  • Dc High Voltage Quick View
    • Dc High Voltage Quick View
    • Dc High Voltage

    • Specification Compliance: IEC 60811, IS 10810 Manual/Motorized or PLC Controlled DC High Voltage Test Set up to 300 kV 10 mA Input 230V, 50/60 Hz Standard Test Ranges: Output 0-3 kV, 0-5 kV, 0-15 kV 0-30 kV; higher capacity as per user requirement  
    • Read more
  • Durability Of Ink Test Quick View
    • Durability Of Ink Test Quick View
    • Durability Of Ink Test

    • Standard Compliance: UL 44, UL 94, UL 1581, UL 2556 and other related standards Durability of ink testing and abrasion resistance test machine in accordance to IEC 60794-1-2. Equipment comprises an aluminium structured traverse unit with two test stations. One is to test the durability of ink on cable surfaces by abrading the surface using a wool felt under specified…
    • Read more
  • Environmental Stress Cracking Resistance Quick View
    • Environmental Stress Cracking Resistance Quick View
    • Environmental Stress Cracking Resistance

    • Specification Compliance: IS 10810 Part 29, ASTM D 1693, IEC 60811-4-1 Environmental stress cracking is the formulation of cracks in a material caused by relatively low tensile strength and environmental condition. ESCR test is performed by slowly bending the test piece and placing in a brass channel The brass channel and specimen are placed in a test tube sand immersed…
    • Read more
  • Flammability Tester Quick View
    • Flammability Tester Quick View
    • Flammability Tester

    • Specification Compliance: IS 10810-53 Fume Hood: 1200 X 300 X 450 mm Scale: Linear Stainless Steel Scale Burner: 2 Nos. X 45 Deg. Trill Burner LPG Gas Regulator Sample Stand
    • Read more
  • Flexing Test Apparatus Quick View
    • Flexing Test Apparatus Quick View
    • Flexing Test Apparatus

    • Specification Compliance: BS 6500, BS EN 50396:2005 Test Apparatus has a carrier supporting two pulleys arranged so that the cable is horizontal between them. The pulleys have a semi-circular shaped groove for circular cables and flat groove for flat cables. Driven by a servo motor and drive attached to the carriage and reversal is made possible through proximity switched installed…
    • Read more
  • Fluorine Content Analysis Test Quick View
    • Fluorine Content Analysis Test Quick View
    • Fluorine Content Analysis Test

    • Specification Compliance: IEC 60684-2 (Ion Selective Method) and other International Standards Ion selective electrode (fluoride) with suitable millivolt meter; - Touch Screen Interface with Direct PPM readout Oxygen Flask combustion unit has been designed as a safe method of igniting samples using oxygen flask combustion procedure for determination of fluorine Unit consists of two-tungsten halogen lamps mounted in the sides…
    • Read more
  • Ft 4 Test Quick View
    • Ft 4 Test Quick View
    • Ft 4 Test

    • Specification Compliance: UL 1581, UL 2556 and other international standards Brick Room Constructed by End User Ducting system with Specialized Exhaust Fan 5 m/s Velocity Measurement Probe and Velocity Profile measurement as per standard requirement Velocity-measuring equipment: bi-directional probe temperature probe ? Type K mineral insulated low pressure transducer (manometer) having a minimum resolution of 0.025 Pa lb/in2); and Data…
    • Read more
  • Halogen Acid Gas Test Apparatus Quick View
    • Halogen Acid Gas Test Apparatus Quick View
    • Halogen Acid Gas Test Apparatus

    • Specification Compliance: IS 10810 Part 59, IEC 60754-1, IEC 60754-2 Test requires 1g (with a tolerance of +/- 0.005g) of insulation material to be placed in a combustion boat inside a tube furnace which is then heated to 800 Deg. C or 950 Deg. C depending on standard requirement High Temperature test furnace for testing single specimen or three specimen…
    • Read more
  • Heat Distortion Test Quick View
    • Heat Distortion Test Quick View
    • Heat Distortion Test

    • Standard Compliance: UL 44, UL 94, UL 1581, UL 2556 and other related standards Two category of ovens in compliance to ASTM D 5243 Type II Ovens and ASTM D 5374 forced air circulation oven for 8-20 or 100 ? 200 air changes per hour Method 1: Based on Flow Meter Measurement The equipment is fitted with rotameter. An external…
    • Read more
  • Hot Deformation Test Quick View
    • Hot Deformation Test Quick View
    • Hot Deformation Test

    • Specification Compliance: IEC 60811-508 Thermoplastics and PVC materials when exposed to continuous heat tend to soften. In this condition when they are subjected to mechanical pressure, they have a tendency to deform at the location of pressure resulting in reduction in thickness Available in test stand for single specimen or up to three specimen Blade 0.70 +/- 0.01 mm supplied…
    • Read more
  • Hot Set Test Quick View
    • Hot Set Test Quick View
    • Hot Set Test

    • Specification Compliance: IEC 60811-507 Designed to perform hot set testing of cable material according to IEC 60811-507 and technically equivalent standards Built on a heating cabinet with glass inspection window Heating cabinet is equipped with air changes (4-20 per hour) measured using rotameter for digital MEMS flow sensor Measurements are made through glass inspection window using a laser line generator…
    • Read more
  • Hydraulic Press Quick View
    • Hydraulic Press Quick View
    • Hydraulic Press

    • Specification Compliance: IEC 60811 To prepare test specimen for Smoke Density Apparatus, Critical Oxygen Index Apparatus & Elongation Test by molding in a specially designed sample die. Manual/Motorized operated hydraulic press with pressure gauge. Provision of heating sample die up to 210?C, heating control is by Digital PID Controller
    • Read more
  • Micro Ohm Meter Quick View
    • Micro Ohm Meter Quick View
    • Micro Ohm Meter

    • Specification Compliance: IEC 60811, IS 10810 and other related standards Microcontroller based instruments having effective measuring range from 0.01?? to 2M? in various models. Four wire measurement systems eliminate lead resistance error. Complete solid state design, ensures fast response, high accuracy, stability & noise immunity Available with conductor resistance measurement with automatic temperature compensation  
    • Read more
  • Million Mega Ohm Meter Quick View
    • Million Mega Ohm Meter Quick View
    • Million Mega Ohm Meter

    • Specification Compliance: IS 10810, IEC and other International Standards Insulation resistance measurement: selectable measurement voltage in the 100?2500 V range with 100 V step, continuous indication of insulation resistance or leakage current, automatic discharge of capacitance of tested object after the insulation resistance measurement, acoustic signalling of five-second periods to facilitate obtaining time characteristics, measured test times T1, T2?i T3?to…
    • Read more
  • Muffle Furnace Quick View
    • Muffle Furnace Quick View
    • Muffle Furnace

    • Specification Compliance: IS 7098, IS 10810 and other equivalent standards Light weight with ceramic fibre wool insulation, outer casing is made of double walled mild steel sheet duly powder coated. Heating elements are made of KANTHAL wire backed by cerawool insulation. Viewing cap is provided on the door. Temperature controlled by PID micro processor controller dual display with safety alarm…
    • Read more
  • Oxygen Index With Temperature Index Quick View
    • Oxygen Index With Temperature Index Quick View
    • Oxygen Index With Temperature Index

    • Specification Compliance: ASTM D 2863 To determine the minimum percentage of Oxygen required to support flame combustion of a material at Room Temperature in FTA mode or at a Higher Temperature. (Up to 400`C) in HFTA mode. World?s most widely used, advanced and leading test equipment for Oxygen & Temperature Index Test Direct readout of Oxygen percentage on an analyser…
    • Read more
  • Ozone Resistance Test Quick View
    • Ozone Resistance Test Quick View
    • Ozone Resistance Test

    • Specification Compliance: IEC 60811-403, ASTM D 470 Ozone Test Chambers provide continuous ozone measurement, control, and computerized recording in one self-contained unit Measurement system incorporates Ozone Monitor, which employs the ultraviolet (UV) absorption principle for ozone measurement directly in ppm Automatic ozone measurement and control system specific to ozone and requires no operating chemicals Equipment comprises Ozone Generator, means for…
    • Read more
  • Resistance To Fire Alone Quick View
    • Resistance To Fire Alone Quick View
    • Resistance To Fire Alone

    • Specification Compliance: BS 6387, BS 7846, BS 8491, BS EN 50200, IEC 60331-21, IEC 60331-1/2/3/4 and other International Standards Resistance to fire alone test is compliant to IEC 60331-21 (500 mm burner test) and BS 6387: 2013 (610 mm burner test) including all other similar test standards. Cable sample under test is held by means of suitable clamps. Middle portion…
    • Read more
  • Resistance To Fire With Mechanical Shock Quick View
    • Resistance To Fire With Mechanical Shock Quick View
    • Resistance To Fire With Mechanical Shock

    • Specification Compliance: BS 6387, BS 7846, BS 8491, BS EN 50200, IEC 60331-21, IEC 60331-1/2/3/4 and other International Standards 3 stands are provided for this application Vertical board with its mounting 10 Kg +/- 0.5 Kg also used for test procedure BS EN 50200: Cable orientation Z shape or U shape and Slotted stand as per BS 8491 18 Kg…
    • Read more
  • Resistance To Fire With Water Quick View
    • Resistance To Fire With Water Quick View
    • Resistance To Fire With Water

    • Specification Compliance: BS 6387, BS 7846, BS 8491, BS EN 50200, IEC 60331-21, IEC 60331-1/2/3/4 and other International Standards Test Rig: comprises suitable water tank in compliance to dimensions specified in BS 6387: 2013 wherein the cable is mounted using clips on the sample stand (strip type) designed as pe specification. 500 mm face Burner with Venturi Mixer with Flow…
    • Read more
  • Sandpaper Abrasion Test Quick View
    • Sandpaper Abrasion Test Quick View
    • Sandpaper Abrasion Test

    • Specification Compliance: ISO 6722, Q/TC730, SAE J1127, SAE J1128, JASO D 608, JASO D 608, JIS C3406 Test sample: 1 Piece Sectional area of sample: 0.13?8mm2. Specimen: diameter less than 8mm, length 1 m Grips: in total 2 grips, space of grips: 700 mm Sandpaper: length 5 m width 20mm , #150 garnet sandpaper suitable for ISO 6722, Q/TC730, #…
    • Read more
  • Scrape Abrasion Test Quick View
    • Scrape Abrasion Test Quick View
    • Scrape Abrasion Test

    • Specification Compliance: ISO 6722, JIS C 3046JASO D 611SAE J1128-2005 Moving frequency?50~60times/min Scrape abrasion stroke: Along electric wire and axles thread move bidirectionally, stroke>10mm Test time?4times?4 digits arithmometer Minimum distance of testing point and testing terminal> 10 mm, turning angle of test piece: 90? Length of test piece?approx.750mm, fixed on the steel anvil. Weights supplied as per requirement
    • Read more
  • Shore A & D Hardness Tester Quick View
    • Shore A & D Hardness Tester Quick View
    • Shore A & D Hardness Tester

    • Specification Compliance: ASTM D2240, DIN 53505, ISO 868 and ISO 7619. Used to measure the hardness of rubber and plastics according ASTM D2240, DIN 53505, ISO 868 and ISO 7619. Shore A scale is applicable for rubber and soft plastics whereas Shore D is for hard rubber and thermoplastics. The Shore A and Shore D meters have a large LCD…
    • Read more
  • Single Vertical Flame Tester Quick View
    • Single Vertical Flame Tester Quick View
    • Single Vertical Flame Tester

    • Specification Compliance: IEC 60695-11-2, IEC 60332-1: 2015 Vertical Flame Test BS EN 60331-1-2 is designed to assess the flame?retardant properties on a single cable length. Test methodology requires a?cable sample of approximately 600mm to be placed vertically between two clamps. A burner flame is then applied for?the duration After the designated length of time, the flame is removed and the…
    • Read more
  • Slicing And Wafer Cutting Machines Quick View
    • Slicing And Wafer Cutting Machines Quick View
    • Slicing And Wafer Cutting Machines

    • Standard Compliance: IEC 60811 and other related standards Available in 4 types depending on hardness of sample, diameter and cutting requirement Roller Type Pneumatic Motorized Manual Slicing machine for PVC AND XLPE samples using motorized roller high precision blades (imported from Germany) cutting system for reducing the thickness of specimen and cross sectional cutting of samples To Remove thickness of…
    • Read more
  • Smoke Density Test Astm D2843 Quick View
    • Smoke Density Test Astm D2843 Quick View
    • Smoke Density Test Astm D2843

    • Standard Compliance: ASTM D 2843 ASTM D 2843 Smoke Density Test is intended to be used for measuring the smoke-producing characteristics of plastics under controlled conditions of combustion or decomposition. Measurements are made in terms of the loss of light transmission through a collected volume of smoke produced under controlled, standardized conditions This test allows measurement of the amount of…
    • Read more
  • Smoke Density Test Iec 61034 Quick View
    • Smoke Density Test Iec 61034 Quick View
    • Smoke Density Test Iec 61034

    • Standard Compliance: IEC 61034 Part I and II Chamber is constructed of high quality stainless steel grade SS 304 Fuel Tray Sample Holder Glass Windows Shield Orifices Mixing Fan S. A ASSOCIATES photometric system comprises: Specialized Light Source: Made in Germany Photocell Receiver (Spectral Human Eye Response): Made in JAPAN 12V Power Supply with 0.001 V resolution display (highly stable)…
    • Read more
  • Solvent Extraction Quick View
    • Solvent Extraction Quick View
    • Solvent Extraction

    • Standard Compliance: ASTM D 2765-01: 2006 Suitable Heating Mantle with Thermostat Control/PID Controller and Temperature Sensor PT 100 Glass jar to be used in conjunction with heating mantle to perform Solvent extraction test Electric heating net is hand knitted from glass yarn and there is no joint to maintain the strength of the?yarn and stands high temperature up to 350?C.…
    • Read more
  • Specific Gravity Tester Quick View
    • Specific Gravity Tester Quick View
    • Specific Gravity Tester

    • Specification Compliance: ASTM D 792, ISO 1183-1 Most common method for the determination of the density of solid plastics is the immersion method, described in ASTM D 792 and ISO 1183-1 Test specimen is weighed in air and its mass is being recorded. It is then immersed in a liquid and its apparent mass upon immersion is recorded Specific gravity…
    • Read more
  • Swedish Chimney Quick View
    • Swedish Chimney Quick View
    • Swedish Chimney

    • Specification Compliance: IS 10810-61, SS424-14-75 Vertical steel tube with rectangular openings, lid and conical tray for ignition fluid Burning flame from a measured quantity of ethanol is applied on the 850 mm long cable for a calculated time and the under composed length from the top is measured. Equipped with Digital Distance gauge and Digital Temperature Indicator with K Type…
    • Read more
  • Temperature Cycling Chamber/Walk In Chambers Quick View
    • Temperature Cycling Chamber/Walk In Chambers Quick View
    • Temperature Cycling Chamber/Walk In Chambers

    • Specification Compliance: IEC 60794-1-2 and other related standards Internal size: W1800* H1800* D1800 mm (Can be customized) Chamber volume: 5.8m? (Can be customized) Average heating rate: 3?C/min Average cooling rate: 1?C/min Temperature range: -40 ~ +150?C (Can be customized) Temperature uniformity: ? 2.0?C Temperature sensor: PT100 sensor (Omega, UK) Interior material: SS304 stainless steel Exterior material: steel plate with protective…
    • Read more
  • Tensile Test Machine 1/2/5 Kn Quick View
    • Tensile Test Machine 1/2/5 Kn Quick View
    • Tensile Test Machine 1/2/5 Kn

    • Standard Compliance: ASTM D 638 and other related standards Fully digital testing system with high precision control and accuracy, includes automated computer control of test methods giving simplicity of operation. High resolution load cells with precision accuracy Class 0.5 Automatic recognition of load cells and extensometers, with instant calibration check facility. Fitted with sealed for life lubricated end bearings. Precision…
    • Read more
  • Tensile Test Machine 25/50 Kn Quick View
    • Tensile Test Machine 25/50 Kn Quick View
    • Tensile Test Machine 25/50 Kn

    • Standard Compliance: ASTM D 638 and other related standards Fully digital testing system with high precision control and accuracy, includes automated computer control of test methods giving simplicity of operation. High resolution load cells with precision accuracy Class 0.5 Automatic recognition of load cells and extensometers, with instant calibration check facility. Fitted with sealed for life lubricated end bearings. Precision…
    • Read more
  • Torsion Test Quick View
    • Torsion Test Quick View
    • Torsion Test

    • Standard Compliance: IS 7098, IS 10810, IEC and other international standards Specialized Torsion Grips for Samples Suitable for GI wire Test Machine designed in Aluminium profile section: Bench Top Model Test Length: up to 500 mm: Standard (Can be customized up to 2 meters) AC Motor Drive PLC Based Programming HMI Touch Screen Operation Cyclic Torsion Test
    • Read more
  • Toxicity Tester Quick View
    • Toxicity Tester Quick View
    • Toxicity Tester

    • Specification Compliance: NES 713, NCD 1409 The Chamber has a steel framework for strength and is constructed from fire retardant grade polypropylene with welded seams and a volume of 0.7 cubic meters The Door, which gives full access to the Chamber for easy cleaning is constructed from clear polycarbonate sheet, backed with laminate for strength and rigidity. Gas Burner has…
    • Read more
  • Ul Ft1 & Ft2 Tests Quick View
    • Ul Ft1 & Ft2 Tests Quick View
    • Ul Ft1 & Ft2 Tests

    • Standard Compliance: UL 44, UL 94, UL 1581, UL 2556 and other related standards Test measures the burning rate of samples positioned either horizontally or vertically. Draft free combustion chamber having a large inside volume of 4.0 m3 and fitted with an interior light and exhaust fan to enable simple evacuation of combustion products Large door and window made from…
    • Read more
  • Ul Oven Type Ii Astm D 5243 Quick View
    • Ul Oven Type Ii Astm D 5243 Quick View
    • Ul Oven Type Ii Astm D 5243

    • Standard Compliance: UL 44, UL 94, UL 1581, UL 2556 and other related standards Two category of ovens in compliance to ASTM D 5243 Type II Ovens and ASTM D 5374 forced air circulation oven for 100 ? 200 air changes per hour Method 1: Based on Flow Meter Measurement The equipment is fitted with rotameter. An external air source…
    • Read more
  • Universal Laboratory Ovens Quick View
    • Universal Laboratory Ovens Quick View
    • Universal Laboratory Ovens

    • Specification Compliance: IEC 60811 and other International Standards High Quality cold rolling steel case with electrostatic spraying ensures aesthetics and longevity of the oven Inner Construction: Stainless Steel Digital PID Controller: made in Japan Digital Timer: Provided Temperature Limiter: Provided Observation Window: Provided Specialized Gasket and Door Latch design  
    • Read more
  • Uv Test Apparatus Astm G154 Quick View
    • Uv Test Apparatus Astm G154 Quick View
    • Uv Test Apparatus Astm G154

    • Specification Compliance: ISO 4892-2, ASTM G53, ASTM G 154 Apparatus for exposing materials to alternate cycles of florescent ultra-violet light & condensation. Unit provides a screening test for coatings, plastics, pigments & the like which may be specifically affected by the UV portion of sunlight spectrum along with moisture penetration. The SA UVCON uses eight FS-40 Fluorescent Sun Lamps as…
    • Read more
  • Uv Test Apparatus Xenon Arc Quick View
    • Uv Test Apparatus Xenon Arc Quick View
    • Uv Test Apparatus Xenon Arc

    • Specification Compliance: ISO 4892-3 and other related standards 1-piece water-cooled xenon lamp with inner quartz and outer borosilicate filter Programmable color display touch screen controller to control and display test parameters Measurement and control of irradiance value at both 340nm, and 300~400nm Measurement and control of Black Panel Temperature (BPT) Measurement and control of chamber temperature and chamber humidity, adjustable…
    • Read more
  • Vacuum Oven Quick View
    • Vacuum Oven Quick View
    • Vacuum Oven

    • Specification Compliance: IEC 60811-402, IS 10810 Part 33 Double Walled cabinet, Outside Duly Powder Coated, Inside: Stainless Steel. Glass Wool Insulated for heating application Temperature control is provided by a P.I.D Controller (Made in JAPAN) with PT - 100 sensor having excellent durability and accuracy. The oven is fitted with a digital vacuum Pirani gauge readable in mbar scale capable…
    • Read more
  • Water Bath Quick View
    • Water Bath Quick View
    • Water Bath

    • Specification Compliance: IS 10810, IEC 60811 Water bath manufactured in high quality corrosion-resistant and easily cleanable stainless steel grade 304 or 316 Temperature range up to +95 ?C Digital PID Temperature Controller (made in JAPAN) In-built circulation pump for temperature uniformity Specialized cartilage Type heaters provide fast and effective heating Water Level Indicator Digital Timer cut off Overshoot Temperature Protection…
    • Read more